Limited availability ORATEX UL 600 MK3 fabric - width: 1800 mm - length: 1 m natural white

For further information please contact our ambassador Lars Gleitsmann from Better Aircraft Fabric via mail: [email protected].
There you will get full service and competent advice.

Description

ORATEX® UL 600 is the ideal covering material for aircraft with an MTOW up to 600 kg. This covering material can be used on any conventionally covered microlight and saves a lot of working time and weight.

ORATEX® is a unique patented polyester fabric, which is ironed onto the structure

This innovative fabric has a protective UV coating and, thanks to its special structure, generates a micro-vortex effect which has a positive effect on aerodynamics.

ORATEX® is patented worldwide and has been approved by all major aviation authorities. Compared to traditional aircraft fabric, it is significantly more durable and easier to process.

If you are looking for a modern and easy-to-process aircraft fabric, which is the latest state of the art, then ORATEX® is just right for you!


Important note: • For all products, which are EASA or LBA approved, we will charge an additional expense, inspection and approval fee of 10 %.


Features: • DOES NOT BURN, non-flammable in accordance with DIN EN ISO 6941 • SAFE – solvent-free working, no harmful vapours • FAST COVERING SYSTEM, ready to fly from the roll, as it is factory-finished • LIGHT – the lightest aircraft fabric in the world, up to 50% weight saving • INSTALLATION UP TO 50% CHEAPER, compared to herritage coverings • UP TO 20% MORE PERFORMANCE, thanks to the Micro-Vortex effect • REPAIRABLE, fast “on-field repairs” possible • PAINTABLE, with the permanently flexible ORACOLOR® 2-part paint • 100% ENVIRONMENTALLY FRIENDLY, as it contains no harmful substances, plasticisers or solvents

The advantages of ORATEX® aircraft fabric compared to conventional Aircraft fabrics: • Weight saving of to 50 %, compared to conventional fabrics • Ready to fly right from the roll, as the fabric is fully factory finished • Reduces the required installation time by up to 50 % • No cracking of the color layer due to aerodynamic loads 849,000 load cycles have been carried out, which corresponds to over 25,000 simulated flight hours • Fast repairs are possible (“on-field repair”) • Not flammable in accordance with DIN EN ISO 6941 • Up to 50 % less covering costs • Very hard-wearing and UV-resistant • Can be re-shrunk again and again • Can be thermoformed • Solvent-free • Worldwide patented • Long service life • No tautening dope • No painting necessary (but possible) • No sanding • No harmful vapours


Application: • After cutting the ORATEX® aircraft fabric to size, our revolutionary heat activated water based adhesive is applied twice to the fabric and twice to the aircraft structure with intermediate drying. • In the next step, the fabric is ironed onto the structure using a digitally temperature-controlled hot air blower and a digitally temperature-controlled iron. This triggers the cross-linking of the adhesive. • Your aircraft is then, as far as the aircraft fabric is concerned, ready for take-off.


Downloads for this article: • ORATEX® Processing Instructions • Technical data sheet ORATEX®


Please note before ordering: • For certified aircraft, it is mandatory to note that you need an engineering order to the STC for your aircraft in order to legally equip it. All necessary information you will find here


Note: In rare cases, the fabric contains small wrinkles that can be completely removed during processing with an iron. These wrinkles do not have any negative impact on the durability of the fabric.  

✔

Properties

Maximum Take-Off Weight in kg 600
Type of Application Iron-on
Type of Article Fabric
Width in mm 1800
Colour Code 000
Colour natural white
Colour Series Oratex
Length in m 1

Question to this article

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.

Lade ...