ORATEX Special remover for Dispersion hotmelt adhesive
250 ml
For further information please contact our ambassador Lars Gleitsmann from Better Aircraft Fabric via mail: Lars@betteraircraftfabric.com.
There you will get full service and competent advice.
Description
IMPORTANT INFORMATION
DISPATCH ONLY WITHIN EUROPE
Special cleaner for ORATEX® Dispersion Hotmelt Adhesive
The ORATEX® Adhesive Remover serves to remove fresh ORATEX® Dispersion Hotmelt Adhesive remainders. You soak an uncoloured (white) piece of natural fibre cloth (e.g. cotton) with the adhesive remover. With this wet piece of cloth, you slighty wipe two to three times over the surface to remove the remainders of the adhesive.
Attention:
The ORATEX® Adhesive Remover is very aggressive. Repeated wiping can – due to the aggressiveness of the adhesive remover – damage the coated surface of ORATEX® and even remove the coatings. Extra care should be taken using the ORATEX® Adhesive Remover on painted surfaces.
ALWAYS WEAR CHEMICAL GLOVES IN CONNECTION WITH SOLVENTS!
Please note before ordering:
For certified aircraft, it is mandatory to note that you need an engineering order to the STC for your aircraft in order to legally equip it.
All necessary information you will find here
Information on product safety:
Signal word: Danger
Hazard statements
H225 Highly flammable liquid and vapour
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P403+P235 Store in a well ventilated place. Keep cool.
P405 Store locked up.
P501 Disposal in accordance with official regulations.
Special labelling of certain mixtures
EUH066 Repeated exposure may cause skin dryness or cracking
* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.
Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.
ORATEX Special remover for Dispersion hotmelt adhesive
250 ml 
