Primer Granules for ORATEX Tapes 6,25 gr.

PRIMER (GRANULES) Granules for ORATEX Tapes

Processing: • Mix the granules with the correct amount Acetone (solvent) of the brand Rodda^TM (Part Number 79 9273 1). • Let the solvent resolve the granules for at least 12 hours. After this time, stir the primer solution thoroughly. • Clean the surface well where the straight / pinked edge tapes are to be positioned. The surface has to be free of grease and dust. • Apply the liquid with a cotton cloth on the surface where the straight / pinked edge tapes should be placed. You can apply the liquid with a small overlap because it dries transparently. • ATTENTION: The cotton cloth should not fuzz because the fluff will stick in the applied liquid and show up. Also a paper towel is not suitable because its particles will stick in the liquid as well and leave traces. • Let the applied liquid air dry approx. 5 minutes after application. Remove the siliconised release paper from the straight / pinked edge tapes and place the straight / pinked edge tapes in the right position. • Fix the straight / pinked edge tapes according to the ORATEX® Manual. Fix the straight / pinked edge tapes with the heat gun (minimum 248 °F / maximum 280 °F). • Observe Temperature-Variation with different substrates. Use the ORATEX® felt blade to press the heat activated adhesive of the tapes into the surface structure. • For a perfect finish use the ORATEX® sealing iron for ironing (248-280 °F) the tapes.

Information: • 2,5 g Primer granules mixed with 100 ml Acetone (solvent) make 100 ml primer solution. • 6,25 g Primer granules mixed with 250 ml Acetone (solvent) make 250 ml primer solution. • 12,5 g Primer granules mixed with 500 ml Acetone (solvent) make 500 ml primer solution. • 25 g Primer granules mixed with 1000 ml Acetone (solvent) make 1000 ml primer solution.

Please note before ordering: • Shipment of our liquid primer is not possible for all countries which are not supplied by truck from Germany. As an alternative for these customers, we supply the granules for dilution with solvent as prescribed in cans (see Product Nos. 08565, 08566, 08567, 08568).