Article is in stock Primer Solution for ORATEX tapes 100 ml

For further information please contact our ambassador Lars Gleitsmann from Better Aircraft Fabric via mail: Lars@betteraircraftfabric.com.
There you will get full service and competent advice.

Description

bonding agent for ORATEX® straight / pinked edge tapes

• our advice for extreme weather conditions • for an optimal adhesion of ORATEX® straight / pinked edge tapes

Application: At first stirr the liquid thoroughly. Clean the surface well where the straight / pinked edge tapes are to be positioned. The surface has to be free of grease and dust. Apply the liquid with a cotton cloth on the surface where the straight / pinked edge tapes should be placed. You can apply the liquid with a small overlap because it dries transparently. ATTENTION: The cotton cloth should not fuzz because the fluff will stick in the applied liquid and show up. Also a paper towel is not suitable because it's particles will stick in the liquid as well and leave traces. Let the applied liquid air dry approx. 5 minutes after application. Remove the siliconised release paper from the straight / pinked edge tapes and place the straight / pinked edge tapes in the right position. Fix the straight / pinked edge tapes according to the ORATEX® Manual. Fix the straight / pinked edge tapes with the heat gun (minimum 120 °C / maximum 150 °C). Observe Temperature-Variation with different substrates. Use the ORATEX® felt blade to press the heat activated adhesive of the tapes into the surface structure. For a perfect finish use the ORATEX® sealing iron for ironing (120-150 °C) the tapes.


Safety Data Sheet: Download
Please note before ordering: For certified aircraft, it is mandatory to note that you need an engineering order to the STC for your aircraft in order to legally equip it. All necessary information you will find here

For all countries that are not truck supplied from Germany a shipment of the liquid primer is not possible. As an alternative to those customers we supply the granulate to be diluted with solvent according to instructions in cans (refer to product no 08565, 08566, 08567, 08568)

Question to this article

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.

Lade ...