ORATEX UL 600 Straight edge tape, width: 76 mm to 100 mm cub yellow, length: 25 mFor further information please contact our ambassador Lars Gleitsmann from Better Aircraft Fabric via mail: Lars@betteraircraftfabric.com.
There you will get full service and competent advice.
For all products, which are EASA or LBA approved, we will charge an additional expense, inspection and approval fee of 10 %.
ORATEX® STRAIGHT EDGE TAPE
The application of ORATEX® PINKED EDGE TAPES and STRAIGHT EDGE TAPES is very simple.
A: Thread sewed covering Stick self-adhesive masking tape around the seams. The tape should have a distance of approx. 5 mm to the left hand side and 5 mm to the right hand side of the thread of the seam. The area of the seam, surrounded by the masking tape, is now being coated with a layer of ORATEX® HOTMELT ADHESIVE (Ref:: 0965 - 0968). Remove the masking tape after the coating has been completed and allow the adhesive to dry over night. When the adhesive is dry, ORATEX® PINKED EDGE TAPES or STRAIGHT EDGE TAPES are ironed over the seams. The ironing temperature should be set in the range of 110°C to 120°C. If you chose a higher temperature, you risk that the ORATEX® PINKED EDGE TAPES or STRAIGHT EDGE TAPES start to shrink. IMPORTANT: ORATEX® PINKED EDGE TAPES and STRAIGHT EDGE TAPES must be chosen wider than the applied adhesive, to be able to cover it completely and to avoid that the glue wells out.
B: Application as reinforcement or turbulator tape Simply iron the ORATEX® PINKED EDGE TAPES or STRAIGHT EDGE TAPES in the desired place. The ironing temperature should be set in the range of 110° C to 120° C. If you chose a higher temperature, you risk that the ORATEX® PINKED EDGE TAPES or STRAIGHT EDGE TAPES start to shrink. In case of difficult surfaces you can proceed an described in “A” by additionally coating the surface with ORATEX® HOTMELT ADHESIVE.
|Maximum Take-Off Weight in kg||600|
|Type of Application||Iron-on|
|Type of Article||Straight Edge Tape|
|Width variable||76 to 100 mm|
|Length in m||25|
* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.
Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. All logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.