Article is in stock ORATEX Dispersion hotmelt adhesive 100 ml

For further information please contact our ambassador Lars Gleitsmann from Better Aircraft Fabric via mail: Lars@betteraircraftfabric.com.
There you will get full service and competent advice.

Description

For all products, which are EASA or LBA approved, we will charge an additional expense, inspection and approval fee of 10 %.

IMPORTANT NOTE
At outside temperatures below 5 °C or above 25 °C, the ORATEX® dispersion hotmelt adhesive can only be shipped in special thermal packaging. Current prices are available upon request.

The ORATEX® DISPERSION HOTMELT ADHESIVE is a revolutionary product which is patented worldwide. It works without the unpleasant smell of solvents which one does know from conventional adhesives. The ORATEX® DISPERSION HOTMELT ADHESIVE is applied to the structure to be covered and onto those parts of the covering which are to be ironed onto the structure. For applying you can use either a synthetic fibre brush or a spray gun. When the adhesive has dried you can iron the covering onto the airframe. If you have no more time, you can do it tomorrow, or the day after tomorrow, or whenever you have time. To become used to the processing we recommend to carry out a sample adhesion on a test piece. Steel surfaces need to be prepared before applying the adhesive to prevent corrosion. Aluminum surfaces need to be treated with an aluminum primer. For all our processing recommendations we assume a surface capable of bearing.

The ORATEX® Dispersion Hotmelt Adhesive must be used within 3 months from delivery date.

Protect from sunlight, storage at +5°C to +25°C.

To avoid agglomeration please filter the glue before use! A suitable fine filter (Art. No. 08405) is included with every ordered container.


Safety Data Sheet: Download


Please note before ordering: For certified aircraft, it is mandatory to note that you need an engineering order to the STC for your aircraft in order to legally equip it. All necessary information you will find here

Question to this article

Please enter your question and we will response immediately

Legal notice:

* Our offer is aimed at final consumers. Therefore, all quoted prices include 19 % German VAT. Transport costs will be charged on top of that.

Pictures may differ from the original products. We cannot assume any liability for the product information given. Accessories shown in the pictures are not included in the delivery. The trademarks mentioned on this website and in our advertising materials, e.g. ORACOVER, ORASTICK, ORALIGHT, ORALINE, ORATRIM, EASYCOAT, EASYPLOT, ORATEX, CARBON are registered trademarks, the use of which is reserved exclusively to Lanitz Prena Folien Factory. All other logos, descriptions and trademarks are property of the respective manufacturer. Subject to change and prior sale. Errors excepted.

Lade ...